Crestworth Giant | 1990s | Designed for Display & Tradeshow Events | Many thanks to Eugene for the details below.
Instructions for Assembly:
1. Place lamp base in final resting position as lamp is not movable once filled and assembled.
2. Fit Plug and bulb. Use 100W Bulb.
3. Ensure Glass is completely clear and dry, free from particles inside
4. Place glass vase into lamp base carefully. Never use any force with the glass vase.
5. Place metal spring into bottom of vase.
6. Fill vase to 3/4 of master fluid (large container). This is achieved by standing on a chair beside lamp and opening tap on container into vase. Do not lean on vase.
7. Lower tube provided into bottom of the vase. Pour the moving base (2 bottles) slowly. Never stir nor shake.
8. Very Slowly add master fluid to vase to 1" of the top. Keep master fluid for topping up.
9. Fit aluminium internal lid.
10. Secure aluminium lid with one lap of sticking tape.
11. Very gently lower metal top over vase top.
12. Allow at least one hour for lamp to stand and settle.
Operation:
1. Switch lamp on and turn up full power via control knob.
2. Should make shapes approx 2hrs.
3. Bubbles may appear but disappear after 3 or 4 days.
4. Once shapes are rising, use the control knob to obtain the best balance of bubbles. Avoid overheating, large slow elongated shaped are the most desirable, adjust knob to obtain this.
5. A correctly adjusted lamp can be run for ten hours a day.
Notes:
If bulb fails, the lamp should be left to cool for a minimum of 3 hours. Then remove top and ensure that the aluminium lid is securely taped on to avoid spilling. The vase can then be lifted out by a strong and steady person and placed to one side whilst bulb is changed. The vase can then be very gently lowered into the base.
Too much disturbance will cause the lamp irreversible clouding. |